Black rubber tread bonded to a cast steel core. Lower loads and more economical than our H90 rubber moldon wheels.

Including Roller Bearings,Nylon Retainer Washers,Double Nylon Retainer Washer,Steel Retainer Washers,Thrust Washers, and Vulcan Seals.

New generation grey non-marking wheel bonded to thermoplastic core. Soft tread but high weight capacities. Clean running wheel with good chemical, oil, and acid resistance.

Fibre-filler impregnated with phenolic resin and molded with extreme heat and pressure. Provides a hard smooth wheel with good corrosion resistance.

Featuring a solid outer sleeve for simplified installation and improved grease retention.

Polyurethane formed on cast center. Good oil, chemical, and acid resistance. Will not take a compression set, and provides load ratings similar to steel wheels.

Polyurethane tread bonded to a polypropylene core for high strength and light weight. Non-marking wheel designed to meet the stringent requirements of clinical environments.

A one-piece insert bearing constructed from Delrin material, used with stainless steel casters where a cam style brake is used.

Resistant to a wide range of chemicals and does not flat spot. High capacities and one piece wheels make for an excellent wheel. Precision bearings available in some sizes.

Non-marking, ergonomic & quiet these wheels are superior for all floor surfaces. Also available in Super Roll Neoprene(XSR) with a low profile tread for easier swiveling and very low rolling resistance.

Fully sealed precision ball bearings provide both greatly increased rollability and higher capacity over roller bearings. They are ideal for towline applications.

Special 90A Durometer(H90) black rubber tire bonded to cast steel center. Provides an economical, quiet rolling wheel.

Pneumatic assemblies include the tire, hub, and rim. Please specify 3/4" or 5/8" bearings when ordering.

Including Flanged Ball Bearings,Flanged Roller Bearings,Flanged Precision Bearings, and Flanged Delrin Bearings

Semi-Pneumatic Wheels are commonly used on lawn mowers or barbeques. They consist of a rubber tire mounted to a steel or plastic centre core.

Ductile Iron and/or Steel wheels are for high weight capacities and are great for high temperature uses such as bakery ovens.

Spanner Bushings are used to "span" the distance between the legs of the fork. The Spanner is locked in place allowing the bearing to turn freely. Precision machined and cross-drilled to allow for lubrication of the wheel bearing.

Ductile Iron Flanged or V-Groove wheels are ideal for track applications, with very high weight capacities.